We build wall-mounted halogen infrared heaters for those tight industrial spots where you need serious heat—no compromises. At the heart is a quartz tube with a halogen filament inside. It throws direct radiant heat onto the target. The air around it stays cool. That’s the kind of focus that makes a difference when space is scarce. Power, voltage, and size—kept simple Most of our units run at 400V and 2500W. That’s a lot of heat packed into a small footprint. The 300mm tube concentrates the heat zone, so you get fast response for spot heating or line heating. And the high voltage design? It lowers the current for the same power. That means you can keep the wiring manageable and avoid big voltage drops, even over longer cable runs. Quartz, coating, and the R7s connector The quartz envelope handles rapid temperature swings without cracking under thermal shock. It’s tough when the heat comes on fast. A reflective coating on the tube pushes more energy forward. You get tighter directional control and less wasted heat. The R7s connector is a straight-blade ceramic terminal built for high temps. Wiring is straightforward, and it holds up through repeated maintenance. It drops right into standard R7s sockets, so you don’t have to rework the machine bay just to hook it up. Where it shines—and what to keep in mind On the production floor, these heaters tackle curing, preheating, and drying where quick start-up matters. Wall-mounting clears floor space and puts the heat exactly where you need it. With a 2500W tube at 400V, you’re dealing with intense heat density. Make sure your machine’s cooling system is ready for the ambient temperature rise. This isn’t a general-purpose heater. It’s a high-output tool, built for the jobs that demand focused, no-nonsense heat.